Our canopy covers are very heavy duty and are built with rope inside the material around the perimeter. All the grommets are placed over a double hem to assure strength.
Canopy Valance Cover Replacement 10'x10'
Poly tarp cover.
- Heavy Duty Polyethylene
- 6.0 oz. Per Square Yrd
- 1200 Denier
- 14x14 Weave Count
- Grommets Approx. Every 18 Inches
Polyethylene is the most common plastic usually used in cables, bottles and containers. When used for tarps, strips of woven polyethylene are in the center. The central layer is then sandwiched by more sheets of polyethylene.
This is the mass in g per 9000 m. The larger the figure the heavier the thread.
Tarps with a 14 by 14 weave count are heavy duty. This is the number of threads in one square inch.
Valance tarps have flaps on the edges. This type of top cover should not be used for low peak canopies because it has a tendency to accumulate water.
Note: Canopy covers for high peak canopies like the ones that ace canopy.com sells requires material that measures 2 feet over the actual frame size. Example: A 10x10 canopy = requires a 10x12 canopy cover. This is to compensate for the peak of the canopy.14x14 Weave Count
U.V. Treated Canopy Cover
Size: Covers Ace 10'x10' Outdoor Canopies
This Canopy Valance Cover Replacement 10'x10' is UV treated on both sides for optimal sun protection you can count on. The 10x10 canopy valance cover replacement has heavy duty grommets placed approximately every 18".
Canopy Valance Cover Replacements usually ship within 1 to 2 business working days. This means, the order leaves our warehouse within 1 to 2 business after the order was placed. All ground orders usually take the following amount of time after they have been shipped:
West Coast = approx. 1 to 2 business working days
Mid West = approx. 3 to 4 business working days
East Coast = approx. 4 to 5 business working days
Ground shipments can take up to 7 to 15 business working days to arrive but this is highly unlikely.